Limited Time Offer!
Selling Price -$4,000.00
2017 Cub Cadet® PRO Z 100 L Series PRO Z 154L EFI
ALL PRO. NO CON.The strongest zero-turn riders in their class don’t come along fast or easy. We dedicated over 40,000 hours of engineering, design and testing to perfect the PRO Z 100 series. With direct feedback from landscapers across the country, we didn’t just remake the zero-turn, we redefined the category. All to enable you to go above and beyond with the best zero-turn rider for the professional.
Features may include
THE POWER OF KOHLER® COMMERCIAL-GRADE ENGINES- High-performance, maximum-power Kohler® engines provide greater torque. Along with a heavy-duty air filter filtration system that ensures a longer engine life, you'll be cutting with confidence year after year.
- Oversized lap bars with quick-adjust knobs, full-length comfort grips and integrated automatic parking brake system reduces operator fatigue.
- The PRO Z 100 L Series features a sloped-nose, triple-blade floating fabricated deck. The 10-gauge reinforced leading-edge, trim-side discharge opening and consistent blade tip speed evenly disperse grass clippings for pristine, professional-grade results.
- Commercial- grade 27 HP Kohler EFI engine
- 54-inch 10-gauge steel commercial deck with top, bottom and side reinforcements for added durability
- 12cc commercial-grade transmission ensures optimal blade tip speed and superior quality of cut at speeds up to 9.5 mph
- Standard high-back suspension seat for all-day comfort
- 2017
- Cub Cadet®
- PRO Z 100 L Series
- PRO Z 154L EFI
- Riding
- Kohler Confidant EFI Closed Loop
- 27HP
- 747CC
- Front/Yolks: 2" x 3" Axle Tube 3/8" Thick Steel Front Yolks
- PTO: Warner Clutch - 125 Ft LB.
- Two Hydro Gear - ZT 3400 Transmissions with Charge Pumps
- HD Low-Profile Throttle Lever, Sealed Key Switch & Electronic Fingertip Engagement PTO
- Blade-Tip: 18,500 FPM | Ground: 9.5MPH FWD. / 4.5MPH REV.
- Fully Welded 10Ga. (.135") Steel Deck Shell with Reinforcements Totaling .560" | Style: Sloped-Nose Design, 10-Gauge Floating/Fabricated w/ 7-Gauge Reinforced Plate
- Fully Welded, Full-Legnth 12Ga. Channel Frame with 14Ga. Reinforcements | Rear Bumper: 5/16" Thick Steel Rear Engine Guard/Pre-Drilled Mounting Points for Attachments with Integrated Rear Hitch
- Reinforcement: 7Ga. (.175") Steel | Top Reinforcement(s): 2Ga. (.250") Top Plate
- Control/Lap Bar: High Performance & Speed Control | Adjustment: 3/4 Length Padded Bars w/Tooless Quick Adjust Dial
- Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
- 23" X 10.5" - 12" (Turf Master)
- 13" X 6.5" - 6" (SMOOTH)
- Intergrated System in Lap Bars
- 15 Amp Regulated
- Hour Meter: Standard Electronic
- 230 Cold Crank Amp
- Twin Tanks - 3.5 Gallon EA. (7 Gallon Total) with Oversized Filler Opening
- Deck: 54" Fabricated Deck | 3/4" Thick Uhmw-Pe Replaceable Trim-Side Wear Guard | Side Construction: 5/16"(.313) Steel on Trim and Discharge Sides | Rops: 2"x2" Foldable 3 Position Low Profile Clearance
- Adjustement: Hand Lever / 15 Position / Spring Assist
- Height: 1" - 5"
- Leading Reinforcement: 1/4" (.250") Steel
- 80"
- 50"
- *Discharge Chute up Width*Rop's up Height: 58"
- 1000 LBS.
- Cup Holder: Intergrated Into Side POD
- Chute: Heavy-Duty Flex Chute (Impact Resistant)
- Covers: Steel - Tooless Quick Release
- 2-Tone High-Back (EVC) Comfort Seat Dial Suspension, Seat Belt, ADJ Arm Rests and 6 in. Seat Travel
- Deck: Triple-Blade / High-Lift Blade (Standard) Marbain Blade
- System: Operator Presence
- A used warranty may be available. Contact dealer for details.
- 54
- Fabricated
- Kohler
- $4,000.00
- Normangee
- Pre-Owned
- 2017
- Cub Cadet®
- PRO Z 100 L Series PRO Z 154L EFI
- 27
- 275
- Two Hydro Gear - ZT 3400 Transmissions with Charge Pumps
- Gas
- Available
- 50"
- *Discharge Chute up Width*Rop's up Height: 58"
- 54
- Fabricated
- Kohler